HOMMEL-ETAMIC Opticline C203

Production:

JENOPTIK Industrial Metrology Germany (Germany)

HOMMEL-ETAMIC Opticline C203

Measuring station Opticline 203 is a budget device, which is optimal for acquaintance with the line of this type of products. Strong design of the device provides a high quality of work in harsh production conditions.

With the Opticline C203, it is possible to measure the part up to 200 mm in length, 30 mm in diameter and weighing up to 5 kg with an accuracy of 1 μm. Mounting system MK2 allows the use of various clamping devices. Consequently, it is possible to quickly transform the device into various parts within a few minutes. Motorized doors are also available.

System benefits:

• Full measurement in a few seconds;
• High resolution and accuracy;
• Low operating costs and virtually no wear;
• Automatic measurement operation;
• The user can not influence the results;
• Intuitive and simple TURBO OPTIC software.

Specifications:

* - Between the tips of the standard supply set. The length can be reduced depending on the clips.

** - Surface of polished part, ambient and object temperature 20°C ± 1°C.
Changes in ambient temperature of less than 0.5°C/h, in accordance with DIN EN ISO 10360 or VDI / VDE 2617.
Mechanical environmental conditions according to DIN EN 30721-3-3, class 3M2.

*** - With 25-times measurements on the surface of polished parts (according to VIM).

Accessories and clamping devices:

A wide range of clamping devices and accessories corresponds to a wide range of possible applications of devices. Standard clamping devices, such as handpieces, are available, and devices for specific application conditions - holders with Morse cone.

Below are the most commonly used fasteners and clamping chucks:

• Various fastening tips;
  
  
  
  
  
  
  
• Variants of fastening inserts;
  
  
  
  
  
  
  
• Clamping chucks and face plates.