HOMMEL-ETAMIC F435/455

Production:: JENOPTIK Industrial Metrology Germany (Germany)

HOMMEL-ETAMIC F435/455

Measuring station (roundness meter) HOMMEL-ETAMIC F435 / 455 is designed to control the basic parameters of the deviation of the shape and location for the bodies of revolution after machining.

Basic functionality:

Rapid automated alignment of the measured part on the roundness meter table;
Automatic measure mode of the parts;
3 motorized measuring axes provide high measurement speed;
Accurate and reliable measurement of almost all parameters of shape deviation and surface arrangement;
Presence of various fixing accessories for solving various measurement tasks;
The Russified and intuitive interface of the TURBO FORM accounting software.

Specifications:

Measuring range
Distance between the axes C and Z, mm:	325
Max measured diameter, mm:	430
Max measured height, mm:	350 / 550
Axis of rotation (axis С)
Table diameter, mm:	250
Aligning the part:	automatic
Error deviation from the roundness of μm + μm / mm height measurement, mkm:	0,02 + 0,0005
Error deviation from the roundness of μm + μm / mm height *measurement, mkm:	0,01 + 0,00025
Error of axial runout at μm + μm / mm radius, μm:	0,03 + 0,0005
Error of axial runout at μm + μm / mm radius*, μm:	0,015 + 0,00025
Centering range, mm:	± 2
Range of leveling, °:	± 0,6
Type of bearing:	pneumatic
Measuring and positioning speed, rpm:	1 - 12
Max load, N:	400
Vertical axis (axisZ)
Measuring range, mm:	350 / 550
Straightness error / 100 mm, μm:	0,15
Straightness error in the whole range, μm:	0,3 / 0,4
Nonparallelism of C and Z axes for the entire measuring range, μm:	not more than 0,8 / 1,3
Measuring and positioning speed, mm/s:	0,2 - 23
Collision protection:	yes
Horizontal axis (axis R)
Measuring range, mm:	220
Straightness error / 100 mm, μm:	0,3
Straightness error in the whole range, μm:	0,6
Non-perpendicularity of C and R axes for the entire measuring range, μm:	not more than 1,2
Measuring and positioning speed, mm/s:	0,2 - 14
Dimensions / weight of the measuring system
Length, mm:	790 / 1010 **
Width, mm:	510 / 650 ***
Height, mm:	960 / 1160
Weight, kg:	230 / 300

All accuracy characteristics are given in accordance with DIN 1101 and at a temperature of 20 ± 1 ° C.
Measured deviation from roundness with filter 0-15 S / r; 6 rpm; LSC.
Measured deviation from straightness with cutoff of pitch 2.5 mm; 100 mm / min; LSS.
* - value of max. deviations for the reference circle LSCI, filter 0-15 S / r; 6 rpm. ** - the value is given for the long axis R.
*** - the value is given taking into account the protective box of the servo drives.

HOMMEL-ETAMIC F435/455kit:

Precision rotary table on pneumatic bearings, with automatic centering and alignment of parts up to 40 kg;
Vertical motorized measuring axis Z = 350/550 mm;
Horizontal motorized measuring axis R = 220 mm;
The new generation sensor FT1.1 with a range of ± 1000 μm is equipped with a magnetic holder for quick change of the probe arms;
Tool table GTF3 with a spring damper platform and a cut-out in the worktop for embedding a granite base;
PC with Windows7, network card, DVD drive, mouse, 22 "TFT monitor, printer;
TURBO FORM software in Russian;
Pneumatic preparation module, including pressure reducer, 0 - 10 Bar manometer, 5 μm coarse filter, 0.5 μm fine filter and membrane dehydrator;
Manufacturer´ s calibration certificate;
User´ s manual;
Training of the customer´s personnel.

Additional options:

Measurement of roughness and ripple (in combination with the GTF3 table and pneumatic vibration suppression system);

The motorized rotary module MDS provides measurement with automatic tilt of the sensor FT1.1 at an angle of 0 - 90 ° and rotation along its axis in the range 0 - 270°;