ISO 9001:2015
Modern means of measuring equipment
 

Leica absolute tracker AT402

Production:
Hexagon MI Leica (Switzerland)
Portability
The measuring system in a minimum set, including the case for transporting and storage, weighs less than 15 kg. Dimensions of the case lets you carry it not only in the car, but even in the luggage compartment of the aircraft.
Working in difficult conditions
Due to the tightness of design of the measuring system, regardless certified by IP54 (IEC 60529), Leica laser trackers can operate in harsh environments. The system maintains high accuracy during measurement of the coolant spray conditions, high humidity and dust, near welding and metal-cutting equipment, etc.

Absolute Tracker Leica AT402 - this is the first laser tracker certified for outdoor use, even in rainy weather.


PowerLock Technology
In 2009, the company Leica Geosystems introduced for the first time ever the term PowerLock. PowerLock is a technology based on vision system that provides automatic detection of the reflector and pointing at him a laser beam. The system provides a well-directed hit of the beam, even in a moving target. Moreover the laser beam is directed only to the reflector without affecting the other objects.

Until the introduction of this technology work with the laser tracker, the work has always been complex and obscure for the operator. The operator had to spend excessive time on gaining experience for effective use of the tracker without interrupting the beam. Application of PowerLock technology significantly reduces operator´s training time and simplifies the tracker.

Wireless concept
In order to ensure autonomous power measurement system, is used two identical batteries, one for the power supply of the tracker and the other to power supply of controller. When running on battery tracker is capable of performing measurements during a work shift. With decreasing of battery power to a critical level, the batteries can be replaced both with system shutdown and without disruption. In any case, the laser tracker will carry out its tasks without failures after replacing the battery.

Built-in wireless data interface of Wi-Fi allows you to get rid of connecting cables and this gives full freedom of action for operator.

Measurement of large objects
Vision angle of tracker Leica AT402 is full horizontal 360 °, Vertical - 290 °. Given the maximum range - 160 meters and high accuracy, can be considered the laser tracker like measurement machine with an incredibly large measuring range.
Volumetric accuracy (Uxyz)
Measurement error (Uxyz) is defined as the deviation of the measured coordinates from the nominal coordinates. Fault of measurement depends on the distance between the laser tracker and the measured point.

For absolute laser tracker Leica AT402 volumetric fault is ± 15 mm + 6 mm/m.

All of these errors in the measurements was obtained using the 1.5" reflector (1.5" Red Ring Reflectors) in standard mode with test point pace of 2 seconds on measurement point and at stable ambient conditions. Measurements were conducted in the linear range of from 1.5 to 80 m and an angular range of ± 45° vertically and 360° horizontally.

Dimensions and weight
  • Dimensions of measuring unit in mm: 290×221×188;
  • Weight of measuring unit, kg: 7.3;
  • Controller´s Dimensions in mm: 250×112×63;
  • Weight of controller kg: 0.8.
Measuring range
  • The rotation in the horizontal plane: ± 360 °;
  • Rotation in the vertical plane: ± 145 °;
  • Linear range, m: 160.
Terms of use
  • Degree of protection: IP54 (IEC 60529);
  • Operating Temperature, ° C: from 0 to 40;
  • Permissible humidity: 95% (non-condensing);
  • Permissible height above sea level, m: from - 700 to + 5500.
Properties of a drive measuring unit
  • Acceleration: 360°/sec2;
  • Rotation speed: 180°/sec;
  • Vision angle of PowerLock: 10 °.
The absolute angular characteristics
  • Angular resolution, arcseconds: 0.07;
  • Maximum error: ± 15 m + 6 m / m;
  • Repeatability: ± 7 mm + 3 mm / m;
  • Precision tilt adjustment, arcseconds: ± 1.
Absolute linear characteristics
  • Accuracy grade, m: 0,1;
  • The maximum error, m: ± 15;
  • Repeatability, mm: ± 5;
Laser radiation
  • Class 2 (in accordance with IEC 60825-1);
  • The second edition (2007-03);
General characteristics
  • Viewfinder: Camera 4:3 IR with improved image and a viewing angle of 10°;
  • Meteostation: humidity, temperature, pressure, and temperature of the object;
  • Remote control: infrared;
  • Connectivity: wired (TCP / IP Cat5), wireless (WLAN IEEE 802.11g);
  • Power supply: built-in lithium-ion battery, AC adapter, power supply for Ethernet (PoE +).
Leica B-Probe

Leica B-probe - an additional means of measuring for laser tracker Leica AT402. It is a contact probe with wireless transmission of data. Due to the extension of the probe it can be operated in the holes.

Specifications
  • Radius, m: 10;
  • Measurement error (Uxyz), mm: ± 0,2;
  • Time of continuous work, hours: 6.
  • Probe length, mm: 150;
  • Degree of protection: IP50.

Additional information